Ford E-Series E-150 E150 E 150 (2013) – fuse box diagram
Year of production: 2013
Passenger compartment fuse panel
The fuse panel is located to the left of the brake pedal and mounted onto the lower left cowl panel.
Fuse/relay location | Ampere rating [A] | Protected circuit |
1 | 30 | Inverter B+ |
2 | 15 | Not used (spare) |
3 | 15 | Not used (spare) |
4 | 30 | Not used (spare) |
5 | 10 | Passenger compartment fuse panel (SPDJB)/Brake-shift interlock |
6 | 20 | Turn signal, Hazard, Stop lamps |
7 | 10 | Left low beam |
8 | 10 | Right low beam |
9 | 15 | Courtesy lamps |
10 | 15 | Switch illumination |
11 | 10 | Not used (spare) |
12 | 7,5 | Not used (spare) |
13 | 5 | Mirrors |
14 | 10 | SYNC, Global positioning system module |
15 | 10 | Not used (spare) |
16 | 15 | Not used (spare) |
17 | 20 | Door locks |
18 | 20 | Not used (spare) |
19 | 25 | Not used (spare) |
20 | 15 | Diagnostic connector (except stripped chassis) |
21 | 15 | Not used (spare) |
22 | 15 | Park lamps, License plate lamps |
23 | 15 | High beams |
24 | 20 | Horn (except stripped chassis) |
25 | 10 | Demand lighting |
26 | 10 | Cluster (except stripped chassis) |
27 | 20 | Ignition switch feed |
28 | 5 | Audio mute (start) |
29 | 5 | Cluster (except stripped chassis) |
30 | 5 | Not used (spare) |
31 | 10 | Not used (spare) |
32 | 10 | Restraints module |
33 | 10 | Trailer Brake Controller |
34 | 5 | Not used (spare) |
35 | 10 | Reverse park aid, Rear video camera, Cutaway run/start |
36 | 5 | Passive anti-theft system radio frequency module |
37 | 10 | Climate control, Stripped chassis IP #1 run/start |
38 | 20 | Not used (spare) |
39 | 20 | Radio, Navigation |
40 | 20 | Amplifier |
41 | 15 | Radio, Switch illumination, Reverse camera mirror, Automatic dimming rear view mirror, Inverter |
42 | 10 | Upfitter switch |
43 | 10 | Stripped chassis instrument panel connector #1 |
44 | 10 | Trailer tow battery charger relay |
45 | 5 | Wipers, Stripped chassis Engine connector 3 |
46 | 7,5 | Passenger airbag deactivation indicator (PADI) |
47 | 30 circuit breaker |
Windows accessory delay |
48 | Relay | Delayed accessory |
Power distribution box
The power distribution box is located in the engine compartment. The power distribution box contains high-current fuses that protect your vehicle’s main electrical systems from overloads.
Fuse/relay location | Ampere rating [A] | Protected Circuits |
1 | HC Micro Relay | Powertrain Control Module (PCM) |
2 | HC Micro Relay | Starter solenoid |
3 | HC Micro Relayy | Wiper |
4 | HC Micro Relay | Trailer tow battery charge |
5 | HC Micro Relay | Fuel pump |
6 | HC Micro Relay | Trailer tow park lamp |
7 | HC Micro Relay | Upfitter #4 |
8 | HC Micro Relay | Upfitter #3 |
9 | HC Micro Relay | Modified vehicle and stripped chassis run/start |
10 | — | Not used |
11 | — | Not used |
12 | 40** | Modified vehicle and stripped chassis run/start |
13 | 30** | Starter solenoid relay |
14 | 40** | Run start relay |
15 | 40** | Modified vehicle and stripped chassis battery |
16 | 50** | Auxiliary A/C blower |
17 | 50** | Trailer tow battery charge, trailer tow park feed |
18 | 30** | Electric trailer brake, Trailer brake controller |
19 | 30** | Upfitter #1 |
20 | 30** | Upfitter #2 |
21 | 50** | Not used |
22 | — | Not used |
23 | G8VA relay | A/C clutch |
24 | G8VA relay | Horn relay (Stripped chassis) |
25 | HC Micro relay | Run/start |
26 | — | Not used |
27 | — | Not used |
28 | 20* | Back up lamp |
29 | 10* | A/C clutch |
30 | 10* | Brake on/off (BOO) switch |
31 | 10* | Cluster battery (stripped chassis only) |
32 | 50** | Blower motor |
33 | 40** | Anti-lock brake system (ABS) pump |
34 | 20** | Stripped chassis horn |
35 | 40** | Powertrain control module relay |
36 | 20** | Ignition switch (Stripped chassis only) |
37 | G8VA relay | Trailer tow stop — left turn signal |
38 | G8VA relay | Trailer tow stop — right turn signal |
39 | G8VA relay | Back up lamp |
40 | ISO relay | Blower motor |
41 | — | Not used |
42 | 15 | Diagnostic connector (stripped chassis) |
43 | 20* | Fuel pump |
44 | 10* | Upfitter #3 |
45 | 15* | Upfitter #4 |
46 | 10* | Powertrain control module keep alive power, Canister vent, Powertrain control module relay coil |
47 | 40** | Anti-lock brake system coil |
48 | 20** | Trailer tow stop lamp/turn signal |
49 | 30** | Wiper motor |
50 | — | Not used |
51 | 20** | Cutaway |
52 | 10* | Stripped chassis and modified vehicle run/start relay coil |
53 | 10* | Anti-lock brake system run/start feed |
54 | 10* | Fuel pump relay coil |
55 | — | Not used |
56 | — | Not used |
57 | 20* | Trailer tow park lamp |
58 | 15* | Trailer tow backup lamp |
59 | — | Not used |
60 | — | One touch integrated start (OTIS) (diode) |
61 | — | Not used |
62 | HC Micro relay | Upfitter #2 |
63 | 30** | Trailer tow battery charge |
64 | — | Not used |
65 | 20** | Power point 2 (glove box) |
66 | 20** | Power point 3 (left-hand B-pillar) |
67 | 20** | Power point 1 (instrument panel) |
68 | 50** | Modified vehicle |
69 | — | Not used |
70 | 30** | Stripped chassis |
71 | — | Not used |
72 | 20** | Cigar lighter / Power point |
73 | — | Not used |
74 | 30* | Power seat |
75 | 20* | Vehicle power 1, Powertrain control module power |
76 | 20* | Vehicle power 2, Powertrain control module – emission related powertrain components |
77 | 10* | Vehicle power 3, Powertrain control module – general powertrain components |
78 | 15* | Vehicle power 4, Fuel pump relay coil |
79 | 10* | Vehicle power 5, Transmission |
80 | 10* | Cluster run/start (stripped chassis only) |
81 | — | Not used |
82 | — | Not used |
83 | — | Fuel pump (diode) |
84 | — | Not used |
85 | HC Micro relay | Upfitter #1 |
* Mini fuses** A1S fuses |
Upfitter controls (if equipped)
The upfitter option package provides four switches, mounted in the center of the instrument panel. These switches will only operate while the ignition is in the on position, whether the engine is running or not.
Switch | Circuit number | Wire color | Fuse Ampere rating [A] |
AUX 1 | CAC05 | Yellow | 30 |
AUX 2 | CAC06 | Green with Brown trace | 30 |
AUX 3 | CAC07 | Violet with Green trace | 10 |
AUX 4 | CAC08 | Brown | 15 |
WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.